home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-20 / radiomd3.zip / R7000.16 < prev    next >
Text File  |  1991-03-10  |  2KB  |  63 lines

  1. R7000.16
  2.  
  3.       DOUBLE THE MEMORY CHANNELS OF THE ICOM R7000 BY
  4.                 REPLACING THE SPEECH SWITCH
  5.  
  6.                    by Jean-Louis Ecochard
  7.  
  8.  
  9.  
  10.  
  11.  
  12. I Introduction
  13.      This modification is based on information received both
  14.      from  Bob  Parnass  and from Gary on the ICOM Technical
  15.      Support line.
  16.  
  17.      Although simple, this modification is  rather  delicate
  18.      to implement because it requires knowledge of unsolder-
  19.      ing and soldering CMOS  components.  It  also  involves
  20.      removing  the  speech  switch. This will of course void
  21.      any ICOM warranty and the result may be a  very  expen-
  22.      sive  paper  weight.  It is very important to note that
  23.      some vendors of ICOM equipment offer a similar  modifi-
  24.      cation for 50.
  25.  
  26.                              WARNING
  27.  
  28.      THIS OPERATION INVOLVES UNSOLDERING  ONE  LEAD  OF  THE
  29.      CMOS  MEMORY CHIP. CMOS DEVICES ARE EXTREMELY SENSITIVE
  30.      TO STATIC ELECTRICITY. USE  THE  APPROPRIATE  EQUIPMENT
  31.      SUCH  AS  GROUND  STRAP,  GROUNDED SOLDERING IRON, ANTI
  32.      STATIC MAT TO MAKE SURE YOU WILL NOT DAMAGE THE CHIP.
  33.  
  34.      THE SILK SCREEN REPRODUCTION IN THE ICOM R7000  SERVICE
  35.      MANUAL  IS  INCORRECT,  REFER TO THE FOLLOWING DOCUMENT
  36.      CONCERNING LOCATING THE POSITION OF THE SPEECH  SWITCH.
  37.      CONTACT ICOM FOR MORE DETAILS.
  38.  
  39.  
  40.  
  41. Equipment:
  42.      - anti static mat
  43.      - ground wrist strap
  44.      - tip grounded soldering iron
  45.      - solder (thin)
  46.      - set of screwdrivers
  47.      - unsoldering pump
  48.      - set small pliers wire cutters
  49.  
  50.  
  51. Parts:
  52.      - photocopy of the exploded view of the R7000
  53.        from the ICOM R7000 service manual
  54.      - remote switch ICOM part # SPUT 19167A
  55.      - 47 K Ohms resistor
  56.      - small insulated wire
  57.  
  58.  
  59.  
  60.                       January 18, 1991
  61.  
  62. CONTINUED IN R7000.17
  63.